国产sm主人调教女m视频,人妻少妇伦在线无码专区视频,综合久久国产九一剧情麻豆,色悠久久久久综合网国产

CN
products
Location: Home  >  Products > CNC Roll Notching And Marking Machine >
products

WXK-500CGHigh precision heavy duty nc roll ring (roll) thread milling machine (hydraulic tension bridle axis version)


Machine Features

The high-precision heavy-duty CNC roll thread milling machine has the advantages of high degree of automation, high machining accuracy, high cutting efficiency, safe and reliable operation, etc. The machine tool meets the requirements of slot milling, slot-hopping, and lettering in one clamping, without the need for secondary clamping of the roll.
The machine bed is a heavy-duty roll machining machine with three parallel guide rails. The width of the bed must reach 910mm, and the width of the saddle must reach 810mm, so as to ensure sufficient rigidity and anti-vibration performance of the machine tool as a whole, so as to be suitable for milling high-hardness tungsten carbide roll rings and high-speed steel. roll. At the same time, it can meet the exchange of hydraulic tensioning shaft and chuck.
The longitudinal movement of the large carriage of the machine tool is equipped with a locking mechanism to ensure that there is no waste groove caused by center deviation when machining high-hardness rolls or performing large cutting operations.
The flying cutter milling body and the swing milling body are installed relative to each other, and the two do not interfere, and the functions of milling grooves and lettering can be converted without re-disassembly and assembly of parts, and there is no need for electrical switching.
The machine bed is treated with aging or fully annealed, and the guide rail is treated with intermediate frequency quenching to reach HRC48°-52°, which improves the wear resistance of the surface; the lateral feed guide uses rolling linear guides to reduce frictional damping and improve moving accuracy. Under normal use, the linear guide will not be worn for 10 years.
The engraving and milling shaft adopts an electric spindle (customized by our factory: rigid enough, uniform force, good heat dissipation, high configuration) directly installed without excessive connection, and can be arbitrarily engraved on rollers of different materials.
The machine tool is equipped with a manual tool setting mechanism, and is equipped with a magnetic grid digital display in the longitudinal movement of the large carriage to ensure the accurate displacement of the manual slot change and eliminate the phenomenon of edge collision caused by human visual inspection.
The control adopts SINUMERIK_808D_ADVANCED system, LCD display, bus-type drive, which can realize any three-axis linkage. All Siemens servo system, the 4 control axes of the machine tool are independent motors and drives. The system has good dynamic quality, and the selected servo system has high execution precision, good reliability, strong anti-interference ability and fast response speed. Each motion axis can be controlled by electronic handwheel.
Weixing independently develops special processing software and parameter interface programming. Operators do not need CNC foundation and can easily master operation skills. Ensure that the processed crescent socket meets the standard of GB1499.2-2018.
This machine tool ensures that the processed crescent groove meets the standard of GB1499.2-2018.
The equipment has good operability, maintainability and safety performance, and does not pollute the environment and endanger human health.
The main shaft structure of this machine tool adopts hydraulic tensioning shaft mechanism and is equipped with high-precision Taiwan hydraulic station. The hydraulic tensioning shaft of the main shaft can control the tensioning state through the system, which greatly improves the efficiency of the cemented carbide roller ring in the clamping and calibration. During the clamping process, the automatic calibration accuracy is automatically locked, and the manual calibration accuracy is not required. At the same time, it also meets the exchange of hydraulic tensioning shaft and chuck.


Main specifications and technical parameters

The maximum diameter of the processing roll is 500mm
Minimum diameter 50mm
The maximum length of the processing roll is 2500mm
The maximum length of the processing roll surface is 1800mm
Machining crescent socket specifications Φ6~Φ50
Machining crescent alveolar β angle arbitrary
Processing crescent grooves and job-hopping
Lateral movement speed (X axis) 0~6000mm/min
Workpiece rotation speed (Y axis) 0~30rpm
Swing head rotation speed (Z axis) 0~50rpm
Flying cutter milling speed (A axis) 0~600rpm
Engraving electric spindle model rated speed D85 24000rpm 2.2Kw
Cooling pump motor AB25-90W
Control system Siemens 808D
Servo motor rated power X axis 1.75kw
Y-axis 2.5kw
Z-axis 1.75kw
A-axis 3.5kw
Hydraulic station 2.2KW
Minimum programming amount 0.001
The effective measuring length of longitudinal magnetic scale is 2000mm
Grating accuracy 0.005mm
Chuck form Four-jaw chuck and hydraulic tensioning shaft are interchangeable
Chuck diameter 400mm
Hydraulic tensioning shaft size Customized according to customers


 

Related products

又粗又爽又猛高潮的在线视频 | 国产精品久久久久无码 | 国产杏吧原创在线观看 | 农村妇女亂伦91熟妇 | 欧洲性开放大片免费无码 | 久久精品aⅴ无码中文字字幕重口 | 全网万部精品人妻 | 超碰电影人人做人人爽 | 在线观看亚洲成人无码 | 亚洲成人一区二区 | 欧美日韩操逼视屏 | 国产老熟女高潮毛片A片仙踪林 | 午夜熟女毛片蜜桃传媒 | 中文字幕精品视频 | 人妻系列喷水久久综合文字幕 | 欧美性猛交XXXX乱大交蜜桃 | 99国产精品午夜视频青椒TV | 欧美日韩一区二区 在线 | 国产一级无码视频 | 亚洲成人AV免费片 | 欧美xxxxxx| 91人妻人人澡人人爽人人精品′ | 国产黄色成人视频免费 | 牛牛超碰色资源站 | 无码av亚洲一区二区毛片公司 | 国产AⅤ爽aV久久久久成人小说 | 亚洲av无码人妻 | 亚洲高清无码视频 | 欧美日韩在线一区 | 国产农村乱婬片A片AAA图片 | 私人伦XX国语对白 | 人妻少妇精品无码专区二区伦伦 | 黄色网址在免费线观看 | 91麻豆国产福利精品 | 亚洲欧洲无码在线观看 | 黄瓜国产在线一区二区 | 黄色网址在线免费 | 欧美成人在线视频 | 久久久久国产精品无码免费看 | 91人妻中文字幕在线精品 | 色欲一级二级久久AV |